Water lines, pressure and backflow in Clarksville, Tennessee
Clarksville Gas & Water's job ends at the meter. From the customer side of the meter yoke into the house, the pipes in Clarksville, Tennessee are the owner's.
The dividing line
The Clarksville Gas & Water FAQ is specific: the property owner maintains the water pipe from the customer side of the meter yoke to the building, and all pipes and fixtures inside. A leak on the street side of the meter is the utility's to fix. Clarksville Gas & Water also states that its technicians cannot repair household leaks or customer line leaks (Cold Weather Precautions).
Why water pressure drops in Clarksville homes
The utility lists the usual causes of low pressure across a whole house:
- A recently added water softener or filter, or one that needs service.
- A pressure reducing valve (PRV) that needs adjusting. Most PRVs sit after the meter and before the water heater; the utility says to talk to a plumber before adjusting one.
- A main shut-off valve that is not fully open.
- A shared meter in an apartment, condo or business, where neighbors' use lowers your pressure.
If pressure suddenly drops to almost nothing, it may be a broken water line; report it to Clarksville Gas & Water. If only the hot water is weak, the utility says to consult a plumber.
Backflow devices and thermal expansion
Backflow preventers and many water meters contain check valves that stop water from flowing back into the public supply. That protects drinking water, but it also makes your home a closed system. When a water heater warms water that has nowhere to expand, pressure rises. The utility's FAQ lists signs of thermal expansion:
- The water heater relief valve drips during the heating cycle.
- Hot water pipes creak.
- A surge of water when a faucet first opens, then a pressure drop.
- Early failure of water heaters, plumbing and fixtures.
- Hot water in the cold lines.
The utility warns that the relief valve should not be used to control thermal expansion; a plumbing professional can fit proper expansion control. The city's cross-connection office handles backflow questions. In winter, the cold-weather checklist also says to winterize or protect backflow preventers.
Questions
Where does Clarksville Gas & Water's responsibility end?
At the meter. The property owner maintains the water pipe from the customer side of the meter yoke to the building, and all pipes and fixtures inside.
Why does my Clarksville water heater relief valve drip?
Clarksville Gas & Water lists a dripping relief valve as a sign of thermal expansion in a closed water system, and says not to rely on the relief valve to control it.